SunSwitch CC2 Controller

CC3 Energy-saving Comfort Controller

SunSwitch CC3 Energy-saving Comfort Controller

This CC3 Energy-saving Comfort Controller enables the heat output from  SunSwitch infrared heaters to be manually adjusted for complete comfort control.
Information

This CC3 Energy-saving Comfort Controller enables the heat output from SunSwitch infrared heaters to be manually adjusted for complete comfort control, while also providing a soft-start to maximise element life. The advanced phase angle circuit has been specially developed for use with quartz halogen heating. When turned down, the CC3 also reduces energy consumption which, in the long run, more than offsets the purchase price.

The CC3 features a soft-start circuit that brings the heaters on gently. This optimises the life of the infrared elements and eliminates nuisance tripping caused by inductive current rush. Optional accessories that automate control and provide additional energy-savings include temperature and PIR sensors. With the optional temperature sensor, if the ambient temperature exceeds the set point, the heater/s are switched off. The PIR volt-free contact can also be wired to a conventional heating time programmer so the heating will switch on and off automatically at scheduled times.

Please ensure you order the ‘CC3 R’ Remote version if you require a remote control handset.

Technical

Electrical supply: 230Vac ± 10% 50 Hz
Max load at 20°C ambient: 4kW/6kW
Power consumption: 50mA
PIR set time period: 5 minutes
Temperature set point: 5°C to 25°C
Factory set temperature: 20°C
Ingress Protection: IP65
Cable entry glands: 3 accept cables up to 2.5mm
Multiple installations: Must be wired in parallel
Operating Temperature: -20°C to 30°C
Dimensions: 280 x 80 x 200 (WDH)