Infresco-CT and T Timer
SunSwitch Infresco-CT and T timer controllers
Weatherproof (IP65) push-button timer for use with quartz halogen infrared heaters.
- 4kW (Infresco-CT) and 6kW (Infresco-T) models available
- Energy-saving push-button timer with 1–30 minute ‘on’ time (Infresco CT) and 1–60 minute ‘on’ time (Infresco T)
- Ideal for use where heaters may otherwise be left switched on
- Soft-start prevents nuisance tripping and prolongs element life
- Low-cost
- Easy to install
- Can be installed indoors or out
Weatherproof (IP65) push-button timer for use with quartz halogen infrared heaters. ‘On’ time can be pre-set internally from 1 minute to 30 or 60 minutes depending on model. Electronically controlled soft start prevents inductive current surge at switch on, reducing the risk of nuisance tripping at the MCB, and prolonging element life by powering up heater elements gently.
Electrical supply: 230Vac ± 10% 50 Hz
Supply fusing: 20LCT or MCB20A (1pole, 440V) recommended or equiv.
Switching capacity: 4kW/6kW
Quiescent power consumption: 50mA.
Terminals: 2.5mm2 rising clamp
Operating Temperature: -20°C to 40°C
Protection rating: IP65
Cable entry glands: 2 (Infresco-CT), 3 (Infresco-T)
Enclosure dimensions: 120 x 50 x 90 mm (Infresco-CT); 100 x 60 x 100 mm (Infresco-T)