StarUp&Down Accessories
These mounting accessories are for use with the StarUp&Down Semi-Automatic and Electric line of products.
Corner profile including stopper
Aluminium
Colours available: Micaceous iron, White RAL 9010
Corner profile including two stoppers
Aluminium
Colours available: Micaceous iron, White RAL 9010
Linear coupling between modules
Aluminium
Colours available: Micaceous iron, White RAL 9010
Angular coupling between modules
Aluminium
Colours available: Micaceous iron, White RAL 9010
Side stabiliser
Recommended every 4m for stability needs and windy areas
Dimensions: 350mm x 1150mm
Galvanised steel
Base dimensions: 590 x 45mm
Side Stabiliser
Recommended every 4m for stability needs and windy areas
Dimensions: 350mm x 1150mm for 1700 & 1880mm models; 350mm x 1150mm for 1950mm & 2220mm
Galvanised steel
Base dimensions: 590 x 45mm
Reinforced Stabiliser – single
Recommended for very windy seaside sites
Base on the floor covers 100mm
Height: 420mm
AISI 316 stainless steel
Reinforced Stabiliser – double
Recommended for very windy seaside sites
Base on the floor covers 100mm
Height: 420mm
AISI 316 stainless steel
Couple of supports for installation on technical floor
Telescopic, (one left and one right)
Galvanised steel
Colour: Micaceous iron
Dimensions: 150 x 80mm (base), 40 x 300mm (upright)
Couple of supports for installation on the ground
Telescopic, (one left and one right)
Galvanised steel
Colour: Micaceous iron or Stainless steel
Dimensions: 150 x 120mm (base), 60 x 300mm (upright)
Couple of flat ground supports for module
Telescopic, (one left and one right)
Galvanised steel
Colour: Micaceous iron
Dimensions:
350mm (internal projection)
250mm (external projection)
300mm (total height)
Two Virucidal antibacterial photocatalytic additive stripes
To apply or applied on the glass of the modules. These are very effective for sanitising the air inside terraces and verandas thanks to the photocatalysis.
Quantity: Two stripes per module
Dimensions: 50 x 1500mm
Including one 150mm sticker to indicate the use of the system to be applied in the dehors/veranda
Logos, writing and images
- Digital layout of writings and simple drawings. One-off.
- Writing and simple logo sticker on glass, one colour. Dimensions: 250 x 350mm (base). Add 25% of the price per extra colour.
- Digital layout of a complex drawing to recreate it in one colour. One-off.
- Sticker with complex drawing to recreate on glass in one colour. Dimensions: 250 x 350mm (base). Add 25% of the price per extra colour.
- Digital layout of a design taken from a colour photo image. One-off.
- For base dimensions above 600mm.
- For base dimensions above 1000mm.
Additional costs
- Total sandblasting of the lower panel
- Special RAL colours (10 modules minimum)
Warnings
- The panic bar installation is possible only on the KIT 3 door.
- Transparent breezeproof gaskets between modules are included; they have to be inserted during the cold season.
- The rubber gaskets COD. SG37 between module and floor, useful to close eventual gaps, needs to be requested when placing the order (if the modules are not fixed on a technical floor). The module installation must be performed on a flat and even surface or on a technical floor. Modules must be fixed to the ground with our telescopic supports that allow minimal adjustments.